Smart Light SRRC Certification: 2025 New Rules & China Market Access Guide

With the booming development of the smart lighting market, SRRC certification has become a mandatory pass for wireless smart lights to be legally sold in the Chinese market. Statistics show that wireless smart lights failing to obtain SRRC certification face risks such as product delisting and fines—compliance directly determines a product’s eligibility to enter the Chinese market.

---

I. What Is SRRC Certification for Smart Lights?

SRRC certification (also known as Type Approval Certification) is a mandatory requirement in Mainland China, aiming to distinguish civil frequency bands from military frequency bands in wireless spectrums. Since June 1, 1999, all radio component products sold and used domestically must obtain radio type approval certification.

Core Values

• Legal Mandate: Smart lights without SRRC certification are prohibited from being sold, distributed, or used in China.
• Technical Compliance Guarantee: Ensures the wireless spectrum parameters of smart lights meet national technical standards.
• Market Access Prerequisite: The foundation for the legal use of wireless functions (e.g., Wi-Fi, Bluetooth) in smart lights.
• Brand Reputation Assurance: Reflects enterprises’ commitment to product compliance and user responsibility.

---

II. Which Smart Lights Require SRRC Certification?

Mandatory Certification Scope

• Bluetooth smart lights: E.g., Bluetooth table lamps, Bluetooth light bulbs.
• Wi-Fi smart lights: All smart lighting products controlled via Wi-Fi connectivity.
• Other wireless communication smart lights: Lighting products using ZigBee, LoRa, or other wireless technologies.

Exemption Scenarios

• Short-range low-power devices with EIRP ≤ 10mW (excluding Bluetooth devices).
• Low-power devices in the 5.8GHz band with EIRP ≤ 14dBm (non-Bluetooth devices).

---

III. Interpretation of 2025 New SRRC Rules

Per the requirements of MIIT Document No. 129, SRRC certification standards have been significantly updated. Key changes are as follows:

Key Differences Between Old & New Standards

Testing Item	Old Standard Requirements	New Standard Requirements (Document No. 129)	Impact of Changes
Bluetooth/Wi-Fi 2.4G High Channel Sideband	-33dBm/100kHz (equivalent to -83dBm/Hz)	-40dBm/1MHz (equivalent to -100dBm/Hz)	Requirements tightened by 17dB
Low-Frequency Spurious Emission Limits	Relatively loose	Stricter requirements for specific bands	Increased testing difficulty
Interference Avoidance Requirements	No explicit requirements	New technical requirements: "Pre-transmission scanning", "monitoring and avoidance"	Additional testing items

Certificate Transition Period

• December 31, 2025: All old-standard certificates expire and become invalid.
• Before December 31, 2025: Enterprises must complete new standard testing and renew certificates.
• January 1, 2026: Full implementation of new standards—old-standard certificates will no longer be issued.

---

IV. Detailed SRRC Certification Process

Complete Certification Flow

1. Pre-Consultation & Application (1–3 Working Days)

   • Sign a certification service contract.
   • Prepare product technical documents.

2. Sample Preparation & Delivery (3–5 Working Days)

   • Provide qualified test samples.
   • Special requirements: 1 sample for fixed-frequency conduction testing + 1 sample with adaptive functionality.

3. Document Review (3–5 Working Days)

   • Complete the SRRC certification application form.
   • Submit supporting documents (business license, ISO certificate, etc.).

4. Laboratory Testing (10–15 Working Days)

   • RF parameter testing.
   • Newly added interference avoidance function testing.
   • Technical rectification if tests fail.

5. Report Review & Certificate Issuance (5–10 Working Days)

   • Issue an official test report upon passing.
   • Submit to the Radio Management Bureau of MIIT for review.
   • Obtain the SRRC certificate after approval.

Certification Cycle

• Standard process: ~20–30 working days.
• Expedited service available for shorter lead times.

---

V. Special Provisions for Modular Applications

For smart lights using wireless modules, SRRC certification has the following special rules:

Complete Modules

• The module’s SRRC certificate must have a type approval code marked with (M).
• The end product must be listed in "Information Technology Equipment and Household Electrical Appliances Embedded with 'Radio Transmission Modules for Non-Independent Operation'" (lighting appliances are included).
• The complete product may reference the module’s certificate, but the module’s CMIIT ID must be indicated on the label or user manual.

Restricted Modules

• Finished products using restricted modules require full re-certification.

---

VI. Common FAQs About Smart Light SRRC Certification

Q: What is the validity period of SRRC certification?A: Theoretically, SRRC certification has no fixed validity period. However, all old-standard certificates must be updated to the new standards by December 31, 2025.

Q: Which smart lights are exempt from SRRC certification?A: Low-power devices with EIRP ≤ 10mW (excluding Bluetooth devices). All Bluetooth-enabled smart lights require SRRC certification regardless of power level.

Q: What are the biggest technical challenges in SRRC certification?A: High channel sideband and low-frequency spurious emissions—especially for Bluetooth/Wi-Fi 2.4G devices, with requirements tightened by 17dB under the new rules.

Q: What materials are needed for certificate renewal?A: Clear electronic scan of the original certificate (physical original must be returned to MIIT’s Radio Management Bureau), valid ISO certificate, and business license.

---

VII. SRRC Certification Service Advantages of GTG Testing Group

1. Professional Testing Capabilities

• Equipped with a full set of SRRC-compliant testing equipment to meet new rule requirements.
• Proficient in the latest SRRC standards (e.g., MIIT Document No. 129).
• End-to-end services from pre-testing to formal certification.

2. Comprehensive Service Support

• Full-process guidance: Standard interpretation, gap analysis, pre-testing, and formal certification.
• Expert team assists with technical document preparation and certification strategy development.
• Optimized modular certification solutions to reduce costs.

3. Cost Optimization

• Pre-testing services: Identify risks early to avoid certification failure.
• Serial certification: Reduce duplicate testing for similar products.
• Expedited channels: Shorten certification cycles.

4. Continuous Compliance Assurance

• Early warnings for standard updates and gap analysis.
• Certificate maintenance and renewal services.
• Support for market supervision responses.

---

SRRC certification is a mandatory threshold for smart lights entering the Chinese market. With the 2025 new rules fully implemented and stricter regulation, proactive planning and professional certification have become critical for smart lighting enterprises. Partnering with an experienced testing and certification provider ensures compliance, builds a robust product compliance system, and lays the foundation for long-term success in China.

GTG Testing Group leverages its comprehensive service system, professional technical team, and rich SRRC experience to deliver end-to-end compliance solutions—helping your smart lighting products gain seamless access to the Chinese market.